Avionics Knowledgebase

Categories

Databases (4)	External Device Integrations (45)	Installation (2)
Installation and Maintenance (4)

Latest Articles My Argus CE is showing a "THE CLOCK IS NOT RUNNING" message on power up. The Argus CE units use a special battery/memory device with a specified minimum life of ten years. When this device is not functioning, a page will pop up during power-up that says: THE CLOCK... (No rating)  1-14-2008    Views: 65    More The map is displaying correctly but numerical distances are off by a factor of ten. In all likelihood you are using a navigation receiver manufactured by Arnav. Arnav made many different models, and frequently had different software versions in the same model. Some software... (No rating)  1-14-2008    Views: 39    More I took the Argus out of the panel to change the database and now it has a problem. The Argus can be a "tight fit" in some panels. It can be reinserted in such panels without all the connector contacts mating, in which case any number of problems can occur, from total... (No rating)  1-14-2008    Views: 51    More How do I remove the Argus from the panel? The Argus is mounted in a "clamp tray:" and connects to the aircraft through one or two rear-panel connectors. There are four mounting screws, one at each corner of the clamp tray.... (No rating)  1-14-2008    Views: 47    More If I simply plug in a color Argus where my monochrome unit was installed, what features do I lose? There is a second connector on the back of the CE units. This connector has extra pins for the following features: CDI Drive to allow Argus internal flight plans to control autopilot left/right... (No rating)  1-14-2008    Views: 46    More

Most Popular Articles My Argus CE is showing a "THE CLOCK IS NOT RUNNING" message on power up. The Argus CE units use a special battery/memory device with a specified minimum life of ten years. When this device is not functioning, a page will pop up during power-up that says: THE CLOCK... (No rating)  1-14-2008    Views: 65    More What are the installation requirements? The Argus is easily installed. While the FAA does require that the Argus be installed by a certified repair station or other licensed individual, installation is still quite simple: Identify a... (No rating)  1-14-2008    Views: 55    More I took the Argus out of the panel to change the database and now it has a problem. The Argus can be a "tight fit" in some panels. It can be reinserted in such panels without all the connector contacts mating, in which case any number of problems can occur, from total... (No rating)  1-14-2008    Views: 51    More How do I remove the Argus from the panel? The Argus is mounted in a "clamp tray:" and connects to the aircraft through one or two rear-panel connectors. There are four mounting screws, one at each corner of the clamp tray.... (No rating)  1-14-2008    Views: 47    More If I simply plug in a color Argus where my monochrome unit was installed, what features do I lose? There is a second connector on the back of the CE units. This connector has extra pins for the following features: CDI Drive to allow Argus internal flight plans to control autopilot left/right... (No rating)  1-14-2008    Views: 46    More

Highest Rated Articles